Smart Vision Lights L300 Downloads
L300 Linear Connect-a-Light
Smart Vision Lights L300 Series Light
L300 Description
The L300 Bar/Linear Light utilizes 12 high-intensity LEDs and features an integrated constant current driver built into the light. Connect-a-Light Series of Linear Lights uses 24VDC and can operate in continuous mode. NPN or PNP strobe triggers can be used to control the on/off input of the light. Control intensity via a 1-10V analog signal line or manual potentiometer. Daisy-chain up to six L300 lights together.
L300 Downloads
Datasheet
User Manual
Dimension Drawing
Timing Chart
2D CAD File (DXF)
3D CAD File (STEP)
Order This Product
This product is available for purchase worldwide at Machine Vision Direct
Accessories
L300 Specifications
Electrical Input
Input Current
Input Power
PNP Trigger
NPN Trigger
Trigger Input
Strobe Duration
Strobe Trigger Latency
Power Indicator
Status Indicators
Intensity Limit
Analog Intensity
Connection
Opperating Temp
Storage Temp
IP Rating
Weight
Compliances
Warranty
24 VDC +/- 5%
Max. 700 mA
Max. 17 W
2.8 mA @ 4VDC | 8.8 mA @ 12VDC | 17.6 mA @ 24VDC
14.4 mA @ Common (0VDC)
PNP greater than +4 VDC (24 VDC max.) to activate or NPN ≥ GND less than 1VDC to activate (not both)
Min. 30 μs | Max. ∞
10 μs
Turns green when powered up
Strobe indicator will turn yellow when on
270° turn-pot. Turn clockwise to increase intensity limit.
The output is adjustable from 10% - 100% of intensity limit by a 1 - 10 VDC signal. Jumpering pin 5 to pin 1 will provide maximum intensity
5-pin M12 connector
-10° to 40° C (14° to 104° F) | RH max 80% non-condensing humidity
-20° to 70° C (-4° to 158° F) | RH max 80% non-condensing humidity
IP50
~0.81 lbs | ~370 g
CE, IEC 62471, RoHS
10 years