Kit Includes:
1x AFSB-1 STANDARD BALL BASE
1x AFSB-2 STANDARD KNUCKLE
1x AFSB-8 PROX SENSOR 8MM

22MM Prox Sensor Kit

Kit Includes:
1x AFSB-1 STANDARD BALL BASE
1x AFSB-2 STANDARD KNUCKLE
1x AFSB-8-22 PROX SENSOR 22MM

Color: Imperial blue

Kit Includes:
1x AFSB-1 STANDARD BALL BASE
1x AFSB-2 STANDARD KNUCKLE
1x AFSB-SBH STANDARD SENSOR BRACKET HOLDER
1x AFSB-SB-12 STANDARD SENSOR BRACKET 12MM

Kit Includes:
1x AFSB-1 STANDARD BALL BASE
1x AFSB-2 STANDARD KNUCKLE
1x AFSB-SBH STANDARD SENSOR BRACKET HOLDER
1x AFSB-SB-18 STANDARD SENSOR BRACKET 18MM

Kit Includes:
1x AFSB-1 STANDARD BALL BASE
1x AFSB-2 STANDARD KNUCKLE
1x AFSB-SBH STANDARD SENSOR BRACKET HOLDER
1x AFSB-SB-8 STANDARD SENSOR BRACKET 8MM

Contains (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-2 link, and (1) Clamp Handle

The AFSB-1004 imperial blue single arm Standard Series kit with a 4″ link is ready to mount any imperial standard series mounting plate. This kit includes: (2) AFSB-1 ball bases, (2) AFSB-2 knuckles, (1) AFSB-3-4 link, and (1) AFSB-Clamp Handle.

Contains (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-6 link, and (1) Clamp Handle

Contains (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-8 link, and (1) Clamp Handle

Contains (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-12 link, and (1) Clamp Handle

Contains (3) AFSB-1 bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-2 links, and (2) Clamp Handles.

Contains (3) AFSB-1 bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-4 links, and (2) Clamp Handles.

This kit includes: (3) AFSB-1 ball bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-6 links, and (2) AFSB-Clamp Handles.

Contains (3) AFSB-1 bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-8 links, and (2) Clamp Handles.

The AFSB-11012 imperial blue dual arm Standard Series kit with 12″ links is ready to mount any imperial standard series mounting plate. This kit includes: (3) AFSB-1 ball bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-12 links, and (2) AFSB-Clamp Handles.

This kit has a M30 thread for mounting start or E-stop button. Includes (1) AFSB-4 Button Base, (1) AFSB-1 Base, (1) AFSB-2 knuckle.

Kit Includes:
1x AFSB-1 STANDARD BALL BASE
1x AFSB-2 STANDARD KNUCKLE
1x AFSB-SBH STANDARD SENSOR BRACKET HOLDER
1x AFSB-SB-30 STANDARD SENSOR BRACKET 30MM

This kit has an AFSB-7 with a 30mm thread for mounting stack lights for status. Includes (1) AFSB-7 Sensor Mount, (1) AFSB-1 Base, (1) AFSB-2 knuckle.

This kit has a monitor mount for VESA 75mm and 100mm. Includes (1) AFSB-9 Plate, (2) AFSB-1 Bases, (3) AFSB-2 knuckles, (2) AFSB-3-4” Links.

This kit is the base Tee Link kit ready for additions. This kit includes (1) AFSB-1 base, (1) AFSB-290 T-Knuckle, (1) AFSB-3T T-Link, (2) AFSB-2 knuckles.

This kit has 2 AFSB-4 which have M30 threads for mounting start/stop buttons. Includes (2) AFSB-4 Button Bases, (1) AFSB-1 Base, (1) AFSB-290 T-knuckle, (1) AFSB-3T T-Link, (2) AFSB-2 knuckles.

The imperial blue (AFSB-1-15) ball base has a hole pattern to fit standard T-slot aluminum extrusions and the base profile is the same width as the aluminum extrusion. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires. Recommended hardware (not included) 1/4-20 Socket Head Cap Screws. Distance between bottom of ball base and counterbore seat is .25″

Color: Imperial blue

The imperial blue (AFSB-1) ball base has a hole pattern to fit most standard T-slot aluminum extrusions. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires. Recommended hardware (not included) 1/4-20 Socket Head Cap Screws. Distance between bottom of ball base and counterbore seat is .25″

Color: Imperial blue

Links are used with knuckles to extend the reach and increase the flexibility. The imperial standard series links are available in 5 lengths: 2”, 4”, 6”, 8”, and 12”. The second number in the name is representative of the length of each link, for example AFSB-3-6 would be a 6” link.

Links are used with knuckles to extend the reach and increase the flexibility. The imperial standard series links are available in 5 lengths: 2”, 4”, 6”, 8”, and 12”. The second number in the name is representative of the length of each link, for example AFSB-3-6 would be a 6” link.

Links are used with knuckles to extend the reach and increase the flexibility. The imperial standard series links are available in 5 lengths: 2”, 4”, 6”, 8”, and 12”. The second number in the name is representative of the length of each link, for example AFSB-3-6 would be a 6” link.

Links are used with knuckles to extend the reach and increase the flexibility. The imperial standard series links are available in 5 lengths: 2”, 4”, 6”, 8”, and 12”. The second number in the name is representative of the length of each link, for example AFSB-3-6 would be a 6” link.

Links are used with knuckles to extend the reach and increase the flexibility. The imperial standard series links are available in 5 lengths: 2”, 4”, 6”, 8”, and 12”. The second number in the name is representative of the length of each link, for example AFSB-3-6 would be a 6” link.

Links are used with knuckles to extend the reach and increase the flexibility. The imperial standard series links are available in 5 lengths: 2”, 4”, 6”, 8”, and 12”. The second number in the name is representative of the length of each link, for example AFSB-3-6 would be a 6” link.

The Standard Tee Link creates two separate branches when used with an AFSB-290 Standard Tee Knuckle gripped on the center ball. The hole in the center ball allows cable and hose routing for each branch.

The Standard Telescoping Link can be adjusted from 6″ to 10″ to center of ball ends. The hole in the center allows cable and hose routing to run thru the Telescoping link.

The imperial blue knuckle uses a double socket configuration to clamp the ball on a base, link, or sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing capability.

The Imperial blue Tee Knuckle was designed to work with a Tee Link to create two branches from one base. These knuckles can also be used to give a full 180° range of motion if you do not need through cable routing.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM,IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sesopart and Truck 30MM threaded barrel-type sensors.
Sight holes allow the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage.The imperial sensor mount AFSB-7 mounts to AFSB-2, AFSB-290, and AFSB-2-2XS.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM,IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sesopart and Truck 12MM threaded barrel-type sensors.
The sensor cable can still run back through your Swivellink assembly for a clean look and protection from damage.The imperial sensor mount AFSB-SB-12 mounts to AFSB-SBH and AFSB-SBH-XS Sensor Bracket Holders.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM,IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sesopart and Truck 18MM threaded barrel-type sensors.
The sensor cable can still run back through your Swivellink assembly for a clean look and protection from damage.The imperial sensor mount AFSB-SB-18 mounts to AFSB-SBH and AFSB-SBH-XS Sensor Bracket Holders.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM,IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sesopart and Truck 30MM threaded barrel-type sensors.
The sensor cable can still run back through your Swivellink assembly for a clean look and protection from damage.The imperial sensor mount AFSB-SB-30 mounts to AFSB-SBH and AFSB-SBH-XS Sensor Bracket Holders.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM,IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sesopart and Truck 8MM threaded barrel-type sensors.
The sensor cable can still run back through your Swivellink assembly for a clean look and protection from damage.The imperial sensor mount AFSB-SB-8 mounts to AFSB-SBH and AFSB-SBH-XS Sensor Bracket Holders.

The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage.The imperial sensor bracket holder mounts to AFSB-SB-30, AFSB-SB-18, AFSB-SB-12, and AFSB-SB-8 brackets.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM, IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sensopart, Sick, Tri-Tronics, and Turck 18MM threaded barrel- type sensors.
Sight holes allow you the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage.
The imperial sensor mount AFSB-8 mounts to AFSB-2, AFSB-290, and AFSB-2-2XS.

22mm Prox Sensor Mount
The imperial sensor mount AFSB-8-22 mounts to AFSB-2, AFSB-290, and AFSB-2-2XS.