Kit Includes:
1x SLM-1 METRIC STANDARD BALL BASE
1x SLM-2 METRIC STANDARD KNUCKLE
1x SLM-8 METRIC PROX SENSOR 8MM

22MM Metric Prox Sensor Kit

Kit Includes:
1x SLM-1 METRIC STANDARD BALL BASE
1x SLM-2 METRIC STANDARD KNUCKLE
1x SLM-8-22 METRIC PROX SENSOR 22MM

Color: Metric Gray

Kit Includes:
1x SLM-1 METRIC STANDARD BALL BASE
1x SLM-2 METRC STANDARD KNUCKLE
1x SLM-SBH METRIC STANDARD SENSOR BRACKET HOLDER
1x SLM-SB-12 METRIC STANDARD SENSOR BRACKET 12MM

Kit Includes:
1x SLM-1 METRIC STANDARD BALL BASE
1x SLM-2 METRC STANDARD KNUCKLE
1x SLM-SBH METRIC STANDARD SENSOR BRACKET HOLDER
1x SLM-SB-18 METRIC STANDARD SENSOR BRACKET 18MM

Kit Includes:
1x SLM-1 METRIC STANDARD BALL BASE
1x SLM-2 METRC STANDARD KNUCKLE
1x SLM-SBH METRIC STANDARD SENSOR BRACKET HOLDER
1x SLM-SB-8 METRIC STANDARD SENSOR BRACKET 8MM

This kit includes: (2) SLM-1 metric ball bases, (2) SLM-2 metric knuckles, (1) SLM-3-50 metric link, and (1) SLM-Clamp Handle.

The SLM-100100 metric gray single arm Standard Series kit with a 100MM link is ready to mount any metric standard series mounting plate. This kit includes: (2) SLM-1 metric ball bases, (2) SLM-2 metric knuckles, (1) SLM-3-100 metric link, and (1) SLM-Clamp Handle.

The kit includes: (2) SLM-1 metric ball bases, (2) SLM-2 metric knuckles, (1) SLM-3-150 metric link, and (1) SLM-clamp handle.

This kit includes: (2) SLM-1 metric ball bases, (2) SLM-2 metric knuckles, (1) SLM-3-200 metric link, and (1) SLM-Clamp Handle.

Contains: (2) SLM-1 metric ball bases, (2) SLM-2 metric knuckles, (1) SLM-3-300 metric link, and (1) SLM-Clamp Handle.

Contains (3) SLM-1 bases, (4) SLM-2 knuckles, (1) SLM-290 tee knuckle, (1) SLM-3T tee link, (2) SLM-3-50 links, and (2) Clamp Handles.

The kit includes: (3) SLM-1 metric ball bases, (4) SLM-2 metric knuckles, (1) SLM-290 metric tee knuckle, (1) SLM-3T metric tee link, (2) SLM-3-100 metric links, and (2) SLM-CLAMP HANDLEs.

This kit includes: (3) SLM-1 metric ball bases, (4) SLM-2 metric knuckles, (1) SLM-290 metric tee knuckle, (1) SLM-3T metric tee link, (2) SLM-3-150 metric links, and (2) SLM-Clamp Handles.

This kit includes: (3) SLM-1 metric ball bases, (4) SLM-2 metric knuckles, (1) SLM-290 metric tee knuckle, (1) SLM-3T metric tee link, (2) SLM-3-200 metric links, and (2) SLM-Clamp Handles.

The SLM-110300 metric gray dual arm Standard Series kit with 300MM links is ready to mount any metric standard series mounting plate. This kit includes: (3) SLM-1 metric ball bases, (4) SLM-2 metric knuckles, (1) SLM-290 metric tee knuckle, (1) SLM-3T metric tee link, (2) AFSB-3-300 metric links, and (2) SLM-Clamp Handles.

This kit has a M30 thread for mounting start or E-stop button. Includes (1) SLM-4 Button Base, (1) SLM-1 Base, (1) SLM-2 knuckle.

This kit has a M30 thread for mounting start or E-stop button. Includes (1) SLM-4 Button Base, (1) SLM-1 Base, (1) SLM-2 knuckle.

Kit Includes:
1x SLM-1 METRIC STANDARD BALL BASE
1x SLM-2 METRIC STANDARD KNUCKLE
1x SLM-SBH METRIC STANDARD SENSOR BRACKET HOLDER
1x SLM-SB-30 METRIC STANDARD SENSOR BRACKET 30MM

This kit has an SLM-7 with a 30mm thread for mounting stack lights for status. Includes (1) SLM-7 Sensor Mount, (1) SLM-1 Base, (1) SLM-2 knuckle.

This kit is the base Tee Link kit ready for additions. This kit includes (1) SLM-1 base, (1) SLM-290 T-Knuckle, (1) SLM-3T T-Link, (2) SLM-2 knuckles.

This kit has 2 SLM-4 which have M30 threads for mounting start/stop buttons. Includes (2) SLM-4 Button Bases, (1) SLM-1 Base, (1) SLM-290 T-knuckle, (1) SLM-3T T-Link, (2) SLM-2 Knuckles.

The metric gray (SLM-1-40) ball base has a slotted hole pattern to fit most metric T-slot aluminum extrusions and the base profile is the same width as the aluminum extrusion. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires. Recommended hardware (not included) M5 Socket Head Cap Screws. Distance between bottom of ball base and top of ball base mounting surface is 10.49MM

Color: Metric Gray

The metric gray (SLM-1) ball base has a slotted hole pattern to fit most metric T-slot aluminum extrusions. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires. Recommended hardware (not included) M5 Socket Head Cap Screws. Distance between bottom of ball base and top of ball base mounting surface is 10.49MM

Color: Metric Gray

Links are used with knuckles to extend the reach and increase the flexibility. The metric standard series links are available in 5 lengths: 50MM, 100MM, 150MM, 200MM, and 300MM. The second number in the name is representative of the length of each link, for example SLM-3-150 would be a 150mm link.

Links are used with knuckles to extend the reach and increase the flexibility. The metric standard series links are available in 5 lengths: 50MM, 100MM, 150MM, 200MM, and 300MM. The second number in the name is representative of the length of each link, for example SLM-3-150 would be a 150mm link.

Links are used with knuckles to extend the reach and increase the flexibility. The metric standard series links are available in 5 lengths: 50MM, 100MM, 150MM, 200MM, and 300MM. The second number in the name is representative of the length of each link, for example SLM-3-150 would be a 150mm link.

Links are used with knuckles to extend the reach and increase the flexibility. The metric standard series links are available in 5 lengths: 50MM, 100MM, 150MM, 200MM, and 300MM. The second number in the name is representative of the length of each link, for example SLM-3-150 would be a 150mm link.

Links are used with knuckles to extend the reach and increase the flexibility. The metric standard series links are available in 5 lengths: 50MM, 100MM, 150MM, 200MM, and 300MM. The second number in the name is representative of the length of each link, for example SLM-3-150 would be a 150mm link.

The Standard Tee Link creates two separate branches when used with a Standard Tee Knuckle gripped on the center ball. The hole in the center ball allows cable and hose routing for each branch.

The Standard Metric Telescoping Link can be adjusted from 150MM to 250MM to center of ball ends. The hole in the center allows cable and hose routing to run thru the Telescoping link.

The metric gray knuckle uses a double socket configuration to clamp the ball on a base, link, or sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing capability.

The metric gray Tee Knuckle was designed to work with a Tee Link to create two branches from one base. These knuckles can also be used to give a full 180° range of motion if you do not need through cable routing.

This metric gray coupler connects a standard size ball to an XS series ball. This is great for mixing and matching to meet your needs.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM, IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sensopart, and Turck 30MM threaded barrel- type sensors.
Sight holes allow the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage. The metric sensor mount SLM-7 mounts to SLM-2, SLM-290, and SLM-2-2XS.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM,IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sesopart and Truck 12MM threaded barrel-type sensors.
The sensor cable can still run back through your Swivellink assembly for a clean look and protection from damage.The metric sensor mount SLM-SB-12 mounts to SLM-SBH and SLM-SBH-XS Sensor Bracket Holders.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM,IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sesopart and Truck 18MM threaded barrel-type sensors.
The sensor cable can still run back through your Swivellink assembly for a clean look and protection from damage.The metric sensor mount SLM-SB-18 mounts to SLM-SBH and SLM-SBH-XS Sensor Bracket Holders.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM,IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sesopart and Truck 30MM threaded barrel-type sensors.
The sensor cable can still run back through your Swivellink assembly for a clean look and protection from damage.The metric sensor mount SLM-SB-30 mounts to SLM-SBH and SLM-SBH-XS Sensor Bracket Holders.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM,IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sesopart and Truck 8MM threaded barrel-type sensors.
The sensor cable can still run back through your Swivellink assembly for a clean look and protection from damage.The metric sensor mount SLM-SB-8 mounts to SLM-SBH and SLM-SBH-XS Sensor Bracket Holders.

The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage.The metric sensor bracket holder mounts to SLM-SB-30, SLM-SB-18, SLM-SB-12, and SLM-SB-8 brackets.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM, IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sensopart, Sick, Tri-Tronics, and Turck 18MM threaded barrel- type sensors.
Sight holes allow you the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage.
The metric sensor mount SLM-8 mounts to SLM-2, SLM-290, and SLM-2-2XS