Kit Includes:
1x SLM-1XS METRIC SMALL BALL BASE
1x SLM-2XS METRIC SMALL KNUCKLE
1x SLM-7XS METRIC PROX SENSOR 12MM

Kit Includes:
1x SLM-1XS METRIC SMALL BALL BASE
1x SLM-2XS METRIC SMALL KNUCKLE
1x SLM-8XS METRIC PROX SENSOR 8MM

This kit includes: (2) SLM-1XS metric small ball bases, (2) SLM-2XS metric small knuckles, (1) SLM-3-50XS metric small link, and (1) SLM-Clamp Handle.

Kit Includes:
1x SLM-1XS METRIC SMALL BALL BASE
2x SLM-2XS90 METRIC SMALL TEE KNUCKLE
1x SLM-3-50XS METRIC SMALL LINK 50MM
1x SLM-5XS METRIC SMALL CAMERA STEM
1x PAMPHLET
1x BOX/PACKAGING

This kit includes: (2) SLM-1XS metric small ball bases, (2) SLM-2XS metric small knuckles, (1) SLM-3-100XS metric small link, and (1) SLM-Clamp Handle.

This kit includes: (3) SLM-1XS metric small ball bases, (5) SLM-2XS90 metric small tee knuckles, (1) SLM-3XST metric small tee link, (2) SLM-3-50XS metric small link, and (2) SLM-Clamp Handles.

Kit Includes:
2x SLM-1XS METRIC SMALL BALL BASE
5x SLM-2XS90 METRIC SMALL TEE KNUCKLE
1x SLM-3XST METRIC SMALL TEE LINK
2x SLM-3-50XS METRIC SMALL LINK 50MM
1x SLM-5XS METRIC SMALL CAMERA STEM
1x PAMPHLET
1x BOX/PACKAGING

This kit includes: (3) SLM-1XS metric small ball bases, (5) SLM-2X90 metric small tee knuckles, (1) SLM-3XST metric small tee link, (2) SLM-3-100XS small links, and (2) SLM-Clamp Handles.

The metric gray (SLM-1XS) ball base mounts to Metric Mounting Plates with XS in the part number and to the Metric XS knuckles (SLM-2XS, SLM-2XS90, and SLM-2-2XS coupler). The XS (extra small) ball base has 2 holes for ease of mounting. The through hole can be used for routing wires, cables, or small hoses. There is an exit groove on the side of the base for cables, hose, and wires. Recommended hardware (not included) M5 Socket Head Cap Screws. Distance between bottom of ball base and top of ball base mounting surface is 6.35MM

Metric Small Links are used with Metric Small Knuckles to extend reach and increase flexibility. The imperial small series links are available in 2 lengths: 50mm and 100mm. The second number in the name is representative of the length of each link, for example SLM-3-50XS would be a 50mm link.

Color: Metric Gray

Metric Small Links are used with Metric Small Knuckles to extend reach and increase flexibility. The imperial small series links are available in 2 lengths: 50mm and 100mm. The second number in the name is representative of the length of each link, for example SLM-3-100XS would be a 100mm link.

Color: Metric Gray

The Metric Small Tee Link, when used with a Metric Small Tee Knuckle gripped on the center ball, creates two separate branches. The hole in the center ball allows cable and hose routing for each branch.

Color: Metric Gray

The metric gray small knuckle uses a double socket configuration to clamp to the ball on a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability.

The metric gray Small Tee Knuckle was designed to work with a Small Tee Link to create two branches from one base. These small tee knuckles can also be used to give a full 180° range of motion if you do not need through cable routing.

This metric gray coupler connects a standard size ball to an XS series ball. This is great for mixing and matching to meet your needs.

The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage.The metric sensor bracket holder mounts to SLM-SB-30, SLM-SB-18, SLM-SB-12, and SLM-SB-8 brackets.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM, IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Sensopart, and Turck 12MM threaded barrel- type sensors.
Sight holes allow you the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage.
Mounts to SLM-2XS, SLM-2XS90, and SLM-2-2XS.

Fits: Allen Bradley, Balluff, Banner, Baumer, Contrinex, Datalogic, Di-Soric, HTM, IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sensopart, and Turck 8MM threaded barrel- type sensors.
Sight holes allow you the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage. The metric sensor mount SLM-8XS mounts to the SLM-2XS, SLM-2XS90, and SLM-2-2XS.

Kit Includes:
1x SLM-1XS METRIC SMALL BALL BASE
1x SLM-2XS METRIC SMALL KNUCKLE
1x SLM-7XS METRIC PROX SENSOR 12MM

Kit Includes:
1x SLM-1XS METRIC SMALL BALL BASE
1x SLM-2XS METRIC SMALL KNUCKLE
1x SLM-8XS METRIC PROX SENSOR 8MM

This kit includes: (2) SLM-1XS metric small ball bases, (2) SLM-2XS metric small knuckles, (1) SLM-3-50XS metric small link, and (1) SLM-Clamp Handle.

Kit Includes:
1x SLM-1XS METRIC SMALL BALL BASE
2x SLM-2XS90 METRIC SMALL TEE KNUCKLE
1x SLM-3-50XS METRIC SMALL LINK 50MM
1x SLM-5XS METRIC SMALL CAMERA STEM
1x PAMPHLET
1x BOX/PACKAGING

This kit includes: (2) SLM-1XS metric small ball bases, (2) SLM-2XS metric small knuckles, (1) SLM-3-100XS metric small link, and (1) SLM-Clamp Handle.

This kit includes: (3) SLM-1XS metric small ball bases, (5) SLM-2XS90 metric small tee knuckles, (1) SLM-3XST metric small tee link, (2) SLM-3-50XS metric small link, and (2) SLM-Clamp Handles.

Kit Includes:
2x SLM-1XS METRIC SMALL BALL BASE
5x SLM-2XS90 METRIC SMALL TEE KNUCKLE
1x SLM-3XST METRIC SMALL TEE LINK
2x SLM-3-50XS METRIC SMALL LINK 50MM
1x SLM-5XS METRIC SMALL CAMERA STEM
1x PAMPHLET
1x BOX/PACKAGING

This kit includes: (3) SLM-1XS metric small ball bases, (5) SLM-2X90 metric small tee knuckles, (1) SLM-3XST metric small tee link, (2) SLM-3-100XS small links, and (2) SLM-Clamp Handles.

The metric gray (SLM-1XS) ball base mounts to Metric Mounting Plates with XS in the part number and to the Metric XS knuckles (SLM-2XS, SLM-2XS90, and SLM-2-2XS coupler). The XS (extra small) ball base has 2 holes for ease of mounting. The through hole can be used for routing wires, cables, or small hoses. There is an exit groove on the side of the base for cables, hose, and wires. Recommended hardware (not included) M5 Socket Head Cap Screws. Distance between bottom of ball base and top of ball base mounting surface is 6.35MM

Metric Small Links are used with Metric Small Knuckles to extend reach and increase flexibility. The imperial small series links are available in 2 lengths: 50mm and 100mm. The second number in the name is representative of the length of each link, for example SLM-3-50XS would be a 50mm link.

Color: Metric Gray

Metric Small Links are used with Metric Small Knuckles to extend reach and increase flexibility. The imperial small series links are available in 2 lengths: 50mm and 100mm. The second number in the name is representative of the length of each link, for example SLM-3-100XS would be a 100mm link.

Color: Metric Gray

The Metric Small Tee Link, when used with a Metric Small Tee Knuckle gripped on the center ball, creates two separate branches. The hole in the center ball allows cable and hose routing for each branch.

Color: Metric Gray

The metric gray small knuckle uses a double socket configuration to clamp to the ball on a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability.

The metric gray Small Tee Knuckle was designed to work with a Small Tee Link to create two branches from one base. These small tee knuckles can also be used to give a full 180° range of motion if you do not need through cable routing.

This metric gray coupler connects a standard size ball to an XS series ball. This is great for mixing and matching to meet your needs.

The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage.The metric sensor bracket holder mounts to SLM-SB-30, SLM-SB-18, SLM-SB-12, and SLM-SB-8 brackets.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM, IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Sensopart, and Turck 12MM threaded barrel- type sensors.
Sight holes allow you the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage.
Mounts to SLM-2XS, SLM-2XS90, and SLM-2-2XS.

Fits: Allen Bradley, Balluff, Banner, Baumer, Contrinex, Datalogic, Di-Soric, HTM, IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sensopart, and Turck 8MM threaded barrel- type sensors.
Sight holes allow you the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage. The metric sensor mount SLM-8XS mounts to the SLM-2XS, SLM-2XS90, and SLM-2-2XS.

Kit Includes:
1x SLM-1XS METRIC SMALL BALL BASE
1x SLM-2XS METRIC SMALL KNUCKLE
1x SLM-7XS METRIC PROX SENSOR 12MM

Kit Includes:
1x SLM-1XS METRIC SMALL BALL BASE
1x SLM-2XS METRIC SMALL KNUCKLE
1x SLM-8XS METRIC PROX SENSOR 8MM

This kit includes: (2) SLM-1XS metric small ball bases, (2) SLM-2XS metric small knuckles, (1) SLM-3-50XS metric small link, and (1) SLM-Clamp Handle.

Kit Includes:
1x SLM-1XS METRIC SMALL BALL BASE
2x SLM-2XS90 METRIC SMALL TEE KNUCKLE
1x SLM-3-50XS METRIC SMALL LINK 50MM
1x SLM-5XS METRIC SMALL CAMERA STEM
1x PAMPHLET
1x BOX/PACKAGING

This kit includes: (2) SLM-1XS metric small ball bases, (2) SLM-2XS metric small knuckles, (1) SLM-3-100XS metric small link, and (1) SLM-Clamp Handle.

This kit includes: (3) SLM-1XS metric small ball bases, (5) SLM-2XS90 metric small tee knuckles, (1) SLM-3XST metric small tee link, (2) SLM-3-50XS metric small link, and (2) SLM-Clamp Handles.

Kit Includes:
2x SLM-1XS METRIC SMALL BALL BASE
5x SLM-2XS90 METRIC SMALL TEE KNUCKLE
1x SLM-3XST METRIC SMALL TEE LINK
2x SLM-3-50XS METRIC SMALL LINK 50MM
1x SLM-5XS METRIC SMALL CAMERA STEM
1x PAMPHLET
1x BOX/PACKAGING

This kit includes: (3) SLM-1XS metric small ball bases, (5) SLM-2X90 metric small tee knuckles, (1) SLM-3XST metric small tee link, (2) SLM-3-100XS small links, and (2) SLM-Clamp Handles.

The metric gray (SLM-1XS) ball base mounts to Metric Mounting Plates with XS in the part number and to the Metric XS knuckles (SLM-2XS, SLM-2XS90, and SLM-2-2XS coupler). The XS (extra small) ball base has 2 holes for ease of mounting. The through hole can be used for routing wires, cables, or small hoses. There is an exit groove on the side of the base for cables, hose, and wires. Recommended hardware (not included) M5 Socket Head Cap Screws. Distance between bottom of ball base and top of ball base mounting surface is 6.35MM

Metric Small Links are used with Metric Small Knuckles to extend reach and increase flexibility. The imperial small series links are available in 2 lengths: 50mm and 100mm. The second number in the name is representative of the length of each link, for example SLM-3-50XS would be a 50mm link.

Color: Metric Gray

Metric Small Links are used with Metric Small Knuckles to extend reach and increase flexibility. The imperial small series links are available in 2 lengths: 50mm and 100mm. The second number in the name is representative of the length of each link, for example SLM-3-100XS would be a 100mm link.

Color: Metric Gray

The Metric Small Tee Link, when used with a Metric Small Tee Knuckle gripped on the center ball, creates two separate branches. The hole in the center ball allows cable and hose routing for each branch.

Color: Metric Gray

The metric gray small knuckle uses a double socket configuration to clamp to the ball on a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability.

The metric gray Small Tee Knuckle was designed to work with a Small Tee Link to create two branches from one base. These small tee knuckles can also be used to give a full 180° range of motion if you do not need through cable routing.

This metric gray coupler connects a standard size ball to an XS series ball. This is great for mixing and matching to meet your needs.

The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage.The metric sensor bracket holder mounts to SLM-SB-30, SLM-SB-18, SLM-SB-12, and SLM-SB-8 brackets.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM, IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Sensopart, and Turck 12MM threaded barrel- type sensors.
Sight holes allow you the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage.
Mounts to SLM-2XS, SLM-2XS90, and SLM-2-2XS.

Fits: Allen Bradley, Balluff, Banner, Baumer, Contrinex, Datalogic, Di-Soric, HTM, IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sensopart, and Turck 8MM threaded barrel- type sensors.
Sight holes allow you the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage. The metric sensor mount SLM-8XS mounts to the SLM-2XS, SLM-2XS90, and SLM-2-2XS.