Fits Spectrum Illumination. See Compatible Products Table for compatible models.

This imperial blue plate mounts to AFSB-1 or AFSB-1-15 ball bases.

Fits Spectrum Illumination. See Compatible Products Table for compatible models.

This imperial blue plate mounts to AFSB-1 or AFSB-1-15 ball bases.

Fits Spectrum Illumination. See Compatible Products Table for compatible models.

This imperial blue plate mounts to AFSB-1 or AFSB-1-15 ball bases.

Fits Spectrum Illumination. See Compatible Products Table for compatible models.

This imperial blue plate mounts to AFSB-1 or AFSB-1-15 ball bases.

Our most versatile in the vision series.
Fits: Banner, CCS, Cognex, Dalsa,IFM, Keyence, Omron, Smart Vision. Mounting hardware to mount camera/lights to this plate not included.

The imperial blue plate mounts to AFSB-1, AFSB-1-15, and AFSB-1XS ball bases.

MAGSWITCH MOUNTING PLATE

The imperial blue plate mounts to AFSB-1, AFSB-1-15, and AFSB-1XS ball bases.

This blank plate is for end user custom mounting.

This imperial blue plate mounts to AFSB-1 or AFSB-1-15 ball base.

Fits: Advanced Illumination, Banner, CCS America, Cognex, Keyence, and Vesa. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1 or AFSB-1-15 ball bases.

Fits: Allied Vision, Baumer, CCS, Dalsa, IFM, JAI, Keyence, Matrox, Microscan, Sony, SVS Vistek. See “Brand Match” tab for model numbers that mount to this plate
The imperial blue plate mounts to AFSB-1XS small ball base.

Fits: CCS, Cognex, Keyence, Matrox, Microscan, National Instruments, Siemens. See “Brand Match” tab for model numbers that mount to this plate.

The imperial blue plate mounts to AFSB-1, AFSB-1-15 or AFSB-1XS ball bases

Fits: Basler, Datalogic, Imaging Source, JAI, Kowa, Omron, Sentech, Sony. See “Brand Match” tab for model numbers that mount to this plate.

Mounts to: AFSB-2XS, AFSB-2XS90, and AFSB-2-2XS

Fits: Sick, Keyence, Omron Sensopart, Smart Vision, Spectrum Illumination, and Wenglor. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1, AFSB-1-15 or AFSB-1XS ball bases.

Fits: Sick and Banner. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1, AFSB-1-15, or AFSB-1XS

Fits: Allied Vision, Avalon, Banner, CCS, Cognex, Keyence, IDS, and Imaging Source. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1, AFSB-1-15, and AFSB-1XS ball bases.

Fits: Cognex, Keyence, and SVS Vistek.. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1, AFSB-1-15, and AFSB-1XS ball bases.

Fits: Banner, Keyence, and IFM.. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1, AFSB-1-15, or AFSB-1XS.

Fits: Banner, Baumer, and Keyence. See Compatible Products Table for compatible models.

This imperial blue plate mounts to AFSB-1, AFSB-1-15 or AFSB-1XS.

Fits: Dalsa, IFM, Smart Vision, and Wenglor. See Compatible Products Table for compatible models.

This imperial blue plate mounts to AFSB-1, AFSB-1-15, and AFSB-1XS ball bases.

Fits: Keyence, Allied Vision, Banner, Dalsa, IDS, IFM, Imaging Source, JAI, LMI, Sick, Smart Vision, Panasonic, and TPL Vision. See “Brand Match” tab for model numbers that mount to this plate.

This imperial blue plate mounts to AFSB-1, AFSB-1-15 and AFSB-1XS ball bases.

Fits Keyence and Smart Vision. See Compatible Products Table for compatible models.

This imperial blue plate mounts to AFSB-1XS small ball base.

Fits: Keyence, Sick, and Smart Vision. See Compatible Products Table for compatible models.

This imperial blue plate mounts to AFSB-1XS small ball base

Fits: Allied Vision, Avalon, Banner, Basler, Baumer, CCS America, Cognex, Dalsa, Datalogic, IDS, Imaging Source, Keyence, Kowa, Microscan and SVS Vistek. See Compatible Products Table for compatible models.

This imperial blue plate mounts to AFSB-1, AFSB-1-15, and AFSB-1XS ball bases

Fits: Banner, CCS America, Dalsa, Datalogic, Keyence, Pepperl Fuchs, and Siemens. See Compatible Products Table for compatible models.

This imperial blue plate mounts to AFSB-1, AFSB-1-15, and AFSB-1XS ball bases

Fits: Banner, CCS America, and LMI. See Compatible Products Table for compatible models.

This imperial blue plate mounts to AFSB-1, AFSB-1-15, and AFSB-1XS ball bases

Fits: Banner and LMI. See Compatible Products Table for compatible models.

This imperial blue plate mounts to AFSB-1, AFSB-1-15, and AFSB-1XS ball bases

Fits: Baumer, CCS Amreica, Dalsa, Datalogic, Keyence, Sentech and Smart Vision. See Compatible Products Table for compatible models.

This imperial blue plate mounts to AFSB-1, AFSB-1-15, or AFSB-1XS ball bases

Fits: Balluff, Datalogic, Di-Soric, FLIR, Keyence, and Smart Vision. See Compatible Products Table for compatible models..

This imperial blue plate mounts to AFSB-1, AFSB-1-15, and AFSB-1XS ball bases

Fits: Keyence, Microscan, and Smart Vision. See Compatible Products Table for compatible models..

This imperial blue plate mounts to AFSB-1, AFSB-1-15, and AFSB-1XS ball bases

Fits: Microscan, Smart Vision, and Spectrum Illumination. See Compatible Products Table for compatible models..

This imperial blue plate mounts to AFSB-1, AFSB-1-15, and AFSB-1XS ball bases.

Fits Microscan. See Compatible Products Table for compatible models..

This imperial blue plate mounts to AFSB-1XS small ball base

Fits: Smart Vision. See “Brand Match” tab for model numbers.

This imperial blue plate mounts to AFSB-1, AFSB-1-15, and AFSB-1XS ball bases.

Fits: Allen Bradley, Banner, and Smart Vision. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1, AFSB-1-15, and AFSB-1XS ball bases.

Fits: Smart Vision. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1 or AFSB-1XS ball bases.

Fits: Cognex and Smart Vision. See “Brand Match” tab for model numbers
This imperial blue plate mounts to AFSB-1, AFSB-1-15, or AFSB-1XS ball bases.

Fits: 30mm thread.
This imperial blue plate mounts to AFSB-1XS small ball base

Fits: Banner. See “Brand Match” tab for model numbers
This imperial blue plate mounts to AFSB-1, AFSB-1-15, or AFSB-1XS ball bases.

Fits: Banner. See “Brand Match” tab for model numbers
This imperial blue plate mounts to AFSB-1, AFSB-1-15, or AFSB-1XS ball bases.

Fits: Metaphase. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1 or AFSB-1-15 ball bases.

Fits: Metaphase. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1 or AFSB-1-15 ball bases.

Fits: Metaphase. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1 or AFSB-1-15 ball bases.

Fits: Metaphase. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1, AFSB-1-15 or AFSB-1XS ball bases.

Fits: Metaphase. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1, AFSB-1-15 or AFSB-1XS ball bases.

Fits: Metaphase. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1, AFSB-1-15, or AFSB-1XS ball bases.

Fits: Metaphase. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1 or AFSB-1-15 ball bases.

Fits: CCS America and Keyence. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1 or AFSB-1-15 ball bases.

This part number comes with one yoke and 2 tabs. The tabs will be used for the 100 series. If using the yoke for the 150 series, the tabs are not needed but they are provided

Fits: Advanced Illumination, Baumer, Cognex, Smart Vision, and Spectrum Illumination. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1, AFSB-1-15, or AFSB-1XS ball bases.

Fits: Advanced Illumination, Keyence, and Smart Vision. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1, AFSB-1-15, or AFSB-1XS ball bases.

Fits: Advanced Illumination. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1, AFSB-1-15, or AFSB-1XS ball bases.

Fits: Advanced Illumination, Cognex, and Smart Vision. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1XS ball bases.

Fits: Advanced Illumination, Banner, CCS America, Cognex, Keyence, and Vesa. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1, AFSB-1-15, or AFSB-1HD ball bases.

Fits Spectrum Illumination. See Compatible Products Table for compatible models.

This imperial blue plate mounts to AFSB-1, AFSB-1-15, or AFSB-1XS ball bases.

Fits Spectrum Illumination. See Compatible Products Table for compatible models.

This imperial blue plate mounts to AFSB-1, AFSB-1-15, or AFSB-1XS ball bases.

Kit Includes:
1x AFSB-1 STANDARD BALL BASE
1x AFSB-2 STANDARD KNUCKLE
1x AFSB-8 PROX SENSOR 8MM

22MM Prox Sensor Kit

Kit Includes:
1x AFSB-1 STANDARD BALL BASE
1x AFSB-2 STANDARD KNUCKLE
1x AFSB-8-22 PROX SENSOR 22MM

Color: Imperial blue

Kit Includes:
1x AFSB-1 STANDARD BALL BASE
1x AFSB-2 STANDARD KNUCKLE
1x AFSB-SBH STANDARD SENSOR BRACKET HOLDER
1x AFSB-SB-12 STANDARD SENSOR BRACKET 12MM

Kit Includes:
1x AFSB-1 STANDARD BALL BASE
1x AFSB-2 STANDARD KNUCKLE
1x AFSB-SBH STANDARD SENSOR BRACKET HOLDER
1x AFSB-SB-18 STANDARD SENSOR BRACKET 18MM

Kit Includes:
1x AFSB-1 STANDARD BALL BASE
1x AFSB-2 STANDARD KNUCKLE
1x AFSB-SBH STANDARD SENSOR BRACKET HOLDER
1x AFSB-SB-8 STANDARD SENSOR BRACKET 8MM

Contains (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-2 link, and (1) Clamp Handle

The AFSB-1004 imperial blue single arm Standard Series kit with a 4″ link is ready to mount any imperial standard series mounting plate. This kit includes: (2) AFSB-1 ball bases, (2) AFSB-2 knuckles, (1) AFSB-3-4 link, and (1) AFSB-Clamp Handle.

Contains (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-6 link, and (1) Clamp Handle

Contains (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-8 link, and (1) Clamp Handle

Contains (2) AFSB-1 bases, (2) AFSB-2 knuckles, (1) AFSB-3-12 link, and (1) Clamp Handle

Contains (3) AFSB-1 bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-2 links, and (2) Clamp Handles.

Contains (3) AFSB-1 bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-4 links, and (2) Clamp Handles.

This kit includes: (3) AFSB-1 ball bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-6 links, and (2) AFSB-Clamp Handles.

Contains (3) AFSB-1 bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-8 links, and (2) Clamp Handles.

The AFSB-11012 imperial blue dual arm Standard Series kit with 12″ links is ready to mount any imperial standard series mounting plate. This kit includes: (3) AFSB-1 ball bases, (4) AFSB-2 knuckles, (1) AFSB-290 tee knuckle, (1) AFSB-3T tee link, (2) AFSB-3-12 links, and (2) AFSB-Clamp Handles.

This kit has a M30 thread for mounting start or E-stop button. Includes (1) AFSB-4 Button Base, (1) AFSB-1 Base, (1) AFSB-2 knuckle.

Kit Includes:
1x AFSB-1 STANDARD BALL BASE
1x AFSB-2 STANDARD KNUCKLE
1x AFSB-SBH STANDARD SENSOR BRACKET HOLDER
1x AFSB-SB-30 STANDARD SENSOR BRACKET 30MM

This kit has an AFSB-7 with a 30mm thread for mounting stack lights for status. Includes (1) AFSB-7 Sensor Mount, (1) AFSB-1 Base, (1) AFSB-2 knuckle.

This kit has a monitor mount for VESA 75mm and 100mm. Includes (1) AFSB-9 Plate, (2) AFSB-1 Bases, (3) AFSB-2 knuckles, (2) AFSB-3-4” Links.

This kit is the base Tee Link kit ready for additions. This kit includes (1) AFSB-1 base, (1) AFSB-290 T-Knuckle, (1) AFSB-3T T-Link, (2) AFSB-2 knuckles.

This kit has 2 AFSB-4 which have M30 threads for mounting start/stop buttons. Includes (2) AFSB-4 Button Bases, (1) AFSB-1 Base, (1) AFSB-290 T-knuckle, (1) AFSB-3T T-Link, (2) AFSB-2 knuckles.

The imperial blue (AFSB-1-15) ball base has a hole pattern to fit standard T-slot aluminum extrusions and the base profile is the same width as the aluminum extrusion. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires. Recommended hardware (not included) 1/4-20 Socket Head Cap Screws. Distance between bottom of ball base and counterbore seat is .25″

Color: Imperial blue

The imperial blue (AFSB-1) ball base has a hole pattern to fit most standard T-slot aluminum extrusions. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires. Recommended hardware (not included) 1/4-20 Socket Head Cap Screws. Distance between bottom of ball base and counterbore seat is .25″

Color: Imperial blue

Links are used with knuckles to extend the reach and increase the flexibility. The imperial standard series links are available in 5 lengths: 2”, 4”, 6”, 8”, and 12”. The second number in the name is representative of the length of each link, for example AFSB-3-6 would be a 6” link.

Links are used with knuckles to extend the reach and increase the flexibility. The imperial standard series links are available in 5 lengths: 2”, 4”, 6”, 8”, and 12”. The second number in the name is representative of the length of each link, for example AFSB-3-6 would be a 6” link.

Links are used with knuckles to extend the reach and increase the flexibility. The imperial standard series links are available in 5 lengths: 2”, 4”, 6”, 8”, and 12”. The second number in the name is representative of the length of each link, for example AFSB-3-6 would be a 6” link.

Links are used with knuckles to extend the reach and increase the flexibility. The imperial standard series links are available in 5 lengths: 2”, 4”, 6”, 8”, and 12”. The second number in the name is representative of the length of each link, for example AFSB-3-6 would be a 6” link.

Links are used with knuckles to extend the reach and increase the flexibility. The imperial standard series links are available in 5 lengths: 2”, 4”, 6”, 8”, and 12”. The second number in the name is representative of the length of each link, for example AFSB-3-6 would be a 6” link.

Links are used with knuckles to extend the reach and increase the flexibility. The imperial standard series links are available in 5 lengths: 2”, 4”, 6”, 8”, and 12”. The second number in the name is representative of the length of each link, for example AFSB-3-6 would be a 6” link.

The Standard Tee Link creates two separate branches when used with an AFSB-290 Standard Tee Knuckle gripped on the center ball. The hole in the center ball allows cable and hose routing for each branch.

The Standard Telescoping Link can be adjusted from 6″ to 10″ to center of ball ends. The hole in the center allows cable and hose routing to run thru the Telescoping link.

The imperial blue knuckle uses a double socket configuration to clamp the ball on a base, link, or sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing capability.

The Imperial blue Tee Knuckle was designed to work with a Tee Link to create two branches from one base. These knuckles can also be used to give a full 180° range of motion if you do not need through cable routing.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM,IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sesopart and Truck 30MM threaded barrel-type sensors.
Sight holes allow the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage.The imperial sensor mount AFSB-7 mounts to AFSB-2, AFSB-290, and AFSB-2-2XS.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM,IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sesopart and Truck 12MM threaded barrel-type sensors.
The sensor cable can still run back through your Swivellink assembly for a clean look and protection from damage.The imperial sensor mount AFSB-SB-12 mounts to AFSB-SBH and AFSB-SBH-XS Sensor Bracket Holders.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM,IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sesopart and Truck 18MM threaded barrel-type sensors.
The sensor cable can still run back through your Swivellink assembly for a clean look and protection from damage.The imperial sensor mount AFSB-SB-18 mounts to AFSB-SBH and AFSB-SBH-XS Sensor Bracket Holders.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM,IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sesopart and Truck 30MM threaded barrel-type sensors.
The sensor cable can still run back through your Swivellink assembly for a clean look and protection from damage.The imperial sensor mount AFSB-SB-30 mounts to AFSB-SBH and AFSB-SBH-XS Sensor Bracket Holders.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM,IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sesopart and Truck 8MM threaded barrel-type sensors.
The sensor cable can still run back through your Swivellink assembly for a clean look and protection from damage.The imperial sensor mount AFSB-SB-8 mounts to AFSB-SBH and AFSB-SBH-XS Sensor Bracket Holders.

The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage.The imperial sensor bracket holder mounts to AFSB-SB-30, AFSB-SB-18, AFSB-SB-12, and AFSB-SB-8 brackets.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM, IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sensopart, Sick, Tri-Tronics, and Turck 18MM threaded barrel- type sensors.
Sight holes allow you the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage.
The imperial sensor mount AFSB-8 mounts to AFSB-2, AFSB-290, and AFSB-2-2XS.

22mm Prox Sensor Mount
The imperial sensor mount AFSB-8-22 mounts to AFSB-2, AFSB-290, and AFSB-2-2XS.

Fits Spectrum Illumination. See Compatible Products Table for compatible models.

This metric gray plate mounts to SLM-1 or SLM-1-40 ball bases.

Color: Metric Gray

Fits Spectrum Illumination. See Compatible Products Table for compatible models.

This metric gray plate mounts to SLM-1 or SLM-1-40 ball bases.

Color: Metric Gray

Fits Spectrum Illumination. See Compatible Products Table for compatible models.

This metric gray plate mounts to SLM-1 or SLM-1-40 ball bases.

Color: Metric Gray

Fits Spectrum Illumination. See Compatible Products Table for compatible models.

This metric gray plate mounts to SLM-1 or SLM-1-40 ball bases.

Our most versatile in the vision series.
Fits: Banner, CCS, Cognex, Dalsa,IFM, Keyence, Omron, Smart Vision. Mounting hardware to mount camera/lights to this plate not included.

The metric gray plate mounts to the SLM-1, SLM-1-40, and SLM-1XS ball bases.

MAGSWITCH MOUNTING PLATE

The metric gray plate mounts to SLM-1, SLM-1-40, and SLM-1XS ball bases.

This blank plate is for end user custom mounting.

This metric gray plate mounts to the SLM-1 or SLM-1-40 ball base.

Fits: Advanced Illumination, Banner, CCS America, Cognex, Keyence, and Vesa. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1 or SLM-1-40 ball bases.

Fits: Allied Vision, Baumer, CCS, Dalsa, IFM, JAI, Keyence, Matrox, Microscan, Sony, SVS Vistek. See “Brand Match” tab for model numbers that mount to this plate

The metric gray plate mounts to the SLM-1XS small ball base.

Fits: CCS, Cognex, Keyence, Matrox, Microscan, National Instruments, Siemens. See “Brand Match” tab for model numbers that mount to this plate.

The metric gray plate mounts to the SLM-1, SLM-1-40, or SLM-1XS metric ball bases.

Fits: Basler, Datalogic, Imaging Source, JAI, Kowa, Omron, Sentech, Sony. See “Brand Match” tab for model numbers that mount to this plate.

Mounts to SLM-2XS, SLM-2XS90, and SLM-2-2XS

Fits: Sick, Keyence, Omron Sensopart, Smart Vision, Spectrum Illumination, and Wenglor. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1, SLM-1-40, or SLM-1XS ball bases.

Fits: Sick and Banner. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1, SLM-1-40, or SLM-1XS

Fits: Allied Vision, Avalon, Banner, CCS, Cognex, Keyence, IDS, and Imaging Source.. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1, SLM-1-40, and SLM-1XS ball bases.

Fits: Cognex, Keyence, and SVS Vistek.. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1, SLM-1-40, and SLM-1XS ball bases.

Fits: Banner, Keyence, and IFM.. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1, SLM-1-40, or SLM-1XS.

Fits: Banner, Baumer, and Keyence. See Compatible Products Table for compatible models.

This metric gray plate mounts to SLM-1, SLM-1-40, or SLM-1XS.

Color: Metric Gray

Fits: Dalsa, IFM, Smart Vision, and Wenglor. See Compatible Products Table for compatible models.

This metric gray plate mounts to SLM-1, SLM-1-40, and SLM-1XS ball bases.

Fits: Keyence, Allied Vision, Banner, Dalsa, IDS, IFM, Imaging Source, JAI, LMI, Sick, Smart Vision, Panasonic, and TPL Vision. See “Brand Match” tab for model numbers that mount to this plate.

This metric gray plate mounts to SLM-1, SLM-1-40, and SLM-1XS ball bases.

Fits Keyence and Smart Vision. See Compatible Products Table for compatible models.

This metric gray plate mounts to SLM-1XS small ball base.

Fits: Keyence, Sick, and Smart Vision. See Compatible Products Table for compatible models.

This metric gray plate mounts to SLM-1XS small ball base

Fits: Allied Vision, Avalon, Banner, Basler, Baumer, CCS America, Cognex, Dalsa, Datalogic, IDS, Imaging Source, Keyence, Kowa, Microscan and SVS Vistek. See Compatible Products Table for compatible models.

This metric gray plate mounts to SLM-1, SLM-1-40, and SLM-1XS ball bases

Fits: Banner, CCS America, Dalsa, Datalogic, Keyence, Pepperl Fuchs, and Siemens. See Compatible Products Table for compatible models.

This metric gray plate mounts to SLM-1, SLM-1-40, and SLM-1XS ball bases

Fits: Banner, CCS America, and LMI. See Compatible Products Table for compatible models..

This metric gray plate mounts to SLM-1, SLM-1-40, and SLM-1XS ball bases

Fits: Banner and LMI. See Compatible Products Table for compatible models.

This metric gray plate mounts to SLM-1, SLM-1-40, and SLM-1XS ball bases

Color: Metric Gray

Fits: Baumer, CCS Amreica, Dalsa, Datalogic, Keyence, Sentech and Smart Vision. See Compatible Products Table for compatible models..

This metric gray plate mounts to SLM-1, SLM-1-40, or SLM-1XS ball bases

Fits: Balluff, Datalogic, Di-Soric, FLIR, Keyence, and Smart Vision. See Compatible Products Table for compatible models..

This metric gray plate mounts to SLM-1, SLM-1-40, and SLM-1XS

Fits: Keyence, Microscan, and Smart Vision. See Compatible Products Table for compatible models..

This metric gray plate mounts to SLM-1, SLM-1-40, and SLM-1XS ball bases

Fits: Microscan, Smart Vision, and Spectrum Illumination. See Compatible Products Table for compatible models..

This metric gray plate mounts to SLM-1, SLM-1-40, and SLM-1XS ball bases.

Fits Microscan. See Compatible Products Table for compatible models..

This metric gray plate mounts to SLM-1XS small ball base

Fits: Smart Vision. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1, SLM-1-40, and SLM-1XS ball bases.

Fits: Allen Bradley, Banner, and Smart Vision. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1, SLM-1-40, and SLM-1XS ball bases.

Fits: Smart Vision. See “Brand Match” tab for model numbers
This metric gray plate mounts to SLM-1 or SLM-1XS ball bases

Color: Metric Gray

Fits: Cognex and Smart Vision. See “Brand Match” tab for model numbers
This metric gray plate mounts to SLM-1, SLM-1-40, or SLM-1XS ball bases.

Fits: 30mm thread.
This metric gray plate mounts to SLM-1XS small ball base

Fits: Banner. See “Brand Match” tab for model numbers
This metric gray plate mounts to SLM-1, SLM-1-40, or SLM-1XS ball bases.

Fits: Banner. See “Brand Match” tab for model numbers
This metric gray plate mounts to SLM-1, SLM-1-40, or SLM-1XS ball bases.

Fits: Metaphase. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1 or SLM-1-40 ball bases.

Color: Metric Gray

Fits: Metaphase. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1 and SLM-1-40 ball bases.

Fits: Metaphase. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1 or SLM-1-40 ball bases.

Fits: Metaphase. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1, SLM-1-40 or SLM-1XS ball bases.

Color: Metric Gray

Fits: Metaphase. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1, SLM-1-40, or SLM-1XS ball bases.

Color: Metric Gray

Fits: Metaphase. See “Brand Match” tab for model numbers that mount to this plate.

The metric gray plate mounts to SLM-1, SLM-1-40 or SLM-1XS ball bases

Color: Metric Gray

Fits: Metaphase. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1 or SLM-1-40 ball bases.

Color: Metric Gray

Fits: CCS America and Keyence. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1 or SLM-1-40 ball bases.

This part number comes with one yoke and 2 tabs. The tabs will be used for the 100 series. If using the yoke for the 150 series, the tabs are not needed but they are provided

Fits: Advanced Illumination, Baumer, Cognex, Smart Vision, and Spectrum Illumination. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1, SLM-1-40, or SLM-1XS ball bases.

Color: Metric Gray

Fits: Advanced Illumination, Keyence, and Smart Vision. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1, SLM-1-40, or SLM-1XS ball bases.

Fits: Advanced Illumination, Keyence, and Smart Vision. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1, SLM-1-40, or SLM-1XS ball bases.

Color: Metric Gray

Fits: Advanced Illumination, Cognex, and Smart Vision. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1XS ball bases.

Color: Metric Gray

Fits Spectrum Illumination. See Compatible Products Table for compatible models.

This metric gray plate mounts to SLM-1, SLM-1-40, or SLM-1XS ball bases.

Color: Metric Gray

Fits Spectrum Illumination. See Compatible Products Table for compatible models.

This metric gray plate mounts to SLM-1, SLM-1-40, or SLM-1XS ball bases.

Color: Metric Gray

Kit Includes:
1x SLM-1 METRIC STANDARD BALL BASE
1x SLM-2 METRIC STANDARD KNUCKLE
1x SLM-8 METRIC PROX SENSOR 8MM

22MM Metric Prox Sensor Kit

Kit Includes:
1x SLM-1 METRIC STANDARD BALL BASE
1x SLM-2 METRIC STANDARD KNUCKLE
1x SLM-8-22 METRIC PROX SENSOR 22MM

Color: Metric Gray

Kit Includes:
1x SLM-1 METRIC STANDARD BALL BASE
1x SLM-2 METRC STANDARD KNUCKLE
1x SLM-SBH METRIC STANDARD SENSOR BRACKET HOLDER
1x SLM-SB-12 METRIC STANDARD SENSOR BRACKET 12MM

Kit Includes:
1x SLM-1 METRIC STANDARD BALL BASE
1x SLM-2 METRC STANDARD KNUCKLE
1x SLM-SBH METRIC STANDARD SENSOR BRACKET HOLDER
1x SLM-SB-18 METRIC STANDARD SENSOR BRACKET 18MM

Kit Includes:
1x SLM-1 METRIC STANDARD BALL BASE
1x SLM-2 METRC STANDARD KNUCKLE
1x SLM-SBH METRIC STANDARD SENSOR BRACKET HOLDER
1x SLM-SB-8 METRIC STANDARD SENSOR BRACKET 8MM

This kit includes: (2) SLM-1 metric ball bases, (2) SLM-2 metric knuckles, (1) SLM-3-50 metric link, and (1) SLM-Clamp Handle.

The SLM-100100 metric gray single arm Standard Series kit with a 100MM link is ready to mount any metric standard series mounting plate. This kit includes: (2) SLM-1 metric ball bases, (2) SLM-2 metric knuckles, (1) SLM-3-100 metric link, and (1) SLM-Clamp Handle.

The kit includes: (2) SLM-1 metric ball bases, (2) SLM-2 metric knuckles, (1) SLM-3-150 metric link, and (1) SLM-clamp handle.

This kit includes: (2) SLM-1 metric ball bases, (2) SLM-2 metric knuckles, (1) SLM-3-200 metric link, and (1) SLM-Clamp Handle.

Contains: (2) SLM-1 metric ball bases, (2) SLM-2 metric knuckles, (1) SLM-3-300 metric link, and (1) SLM-Clamp Handle.

Contains (3) SLM-1 bases, (4) SLM-2 knuckles, (1) SLM-290 tee knuckle, (1) SLM-3T tee link, (2) SLM-3-50 links, and (2) Clamp Handles.

The kit includes: (3) SLM-1 metric ball bases, (4) SLM-2 metric knuckles, (1) SLM-290 metric tee knuckle, (1) SLM-3T metric tee link, (2) SLM-3-100 metric links, and (2) SLM-CLAMP HANDLEs.

This kit includes: (3) SLM-1 metric ball bases, (4) SLM-2 metric knuckles, (1) SLM-290 metric tee knuckle, (1) SLM-3T metric tee link, (2) SLM-3-150 metric links, and (2) SLM-Clamp Handles.

This kit includes: (3) SLM-1 metric ball bases, (4) SLM-2 metric knuckles, (1) SLM-290 metric tee knuckle, (1) SLM-3T metric tee link, (2) SLM-3-200 metric links, and (2) SLM-Clamp Handles.

The SLM-110300 metric gray dual arm Standard Series kit with 300MM links is ready to mount any metric standard series mounting plate. This kit includes: (3) SLM-1 metric ball bases, (4) SLM-2 metric knuckles, (1) SLM-290 metric tee knuckle, (1) SLM-3T metric tee link, (2) AFSB-3-300 metric links, and (2) SLM-Clamp Handles.

This kit has a M30 thread for mounting start or E-stop button. Includes (1) SLM-4 Button Base, (1) SLM-1 Base, (1) SLM-2 knuckle.

This kit has a M30 thread for mounting start or E-stop button. Includes (1) SLM-4 Button Base, (1) SLM-1 Base, (1) SLM-2 knuckle.

Kit Includes:
1x SLM-1 METRIC STANDARD BALL BASE
1x SLM-2 METRIC STANDARD KNUCKLE
1x SLM-SBH METRIC STANDARD SENSOR BRACKET HOLDER
1x SLM-SB-30 METRIC STANDARD SENSOR BRACKET 30MM

This kit has an SLM-7 with a 30mm thread for mounting stack lights for status. Includes (1) SLM-7 Sensor Mount, (1) SLM-1 Base, (1) SLM-2 knuckle.

This kit is the base Tee Link kit ready for additions. This kit includes (1) SLM-1 base, (1) SLM-290 T-Knuckle, (1) SLM-3T T-Link, (2) SLM-2 knuckles.

This kit has 2 SLM-4 which have M30 threads for mounting start/stop buttons. Includes (2) SLM-4 Button Bases, (1) SLM-1 Base, (1) SLM-290 T-knuckle, (1) SLM-3T T-Link, (2) SLM-2 Knuckles.

The metric gray (SLM-1-40) ball base has a slotted hole pattern to fit most metric T-slot aluminum extrusions and the base profile is the same width as the aluminum extrusion. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires. Recommended hardware (not included) M5 Socket Head Cap Screws. Distance between bottom of ball base and top of ball base mounting surface is 10.49MM

Color: Metric Gray

The metric gray (SLM-1) ball base has a slotted hole pattern to fit most metric T-slot aluminum extrusions. The through hole in the ball base can be used for routing wires, cables, or small hoses. There is an exit groove out the side of the base for cables, hose, and wires. Recommended hardware (not included) M5 Socket Head Cap Screws. Distance between bottom of ball base and top of ball base mounting surface is 10.49MM

Color: Metric Gray

Links are used with knuckles to extend the reach and increase the flexibility. The metric standard series links are available in 5 lengths: 50MM, 100MM, 150MM, 200MM, and 300MM. The second number in the name is representative of the length of each link, for example SLM-3-150 would be a 150mm link.

Links are used with knuckles to extend the reach and increase the flexibility. The metric standard series links are available in 5 lengths: 50MM, 100MM, 150MM, 200MM, and 300MM. The second number in the name is representative of the length of each link, for example SLM-3-150 would be a 150mm link.

Links are used with knuckles to extend the reach and increase the flexibility. The metric standard series links are available in 5 lengths: 50MM, 100MM, 150MM, 200MM, and 300MM. The second number in the name is representative of the length of each link, for example SLM-3-150 would be a 150mm link.

Links are used with knuckles to extend the reach and increase the flexibility. The metric standard series links are available in 5 lengths: 50MM, 100MM, 150MM, 200MM, and 300MM. The second number in the name is representative of the length of each link, for example SLM-3-150 would be a 150mm link.

Links are used with knuckles to extend the reach and increase the flexibility. The metric standard series links are available in 5 lengths: 50MM, 100MM, 150MM, 200MM, and 300MM. The second number in the name is representative of the length of each link, for example SLM-3-150 would be a 150mm link.

The Standard Tee Link creates two separate branches when used with a Standard Tee Knuckle gripped on the center ball. The hole in the center ball allows cable and hose routing for each branch.

The Standard Metric Telescoping Link can be adjusted from 150MM to 250MM to center of ball ends. The hole in the center allows cable and hose routing to run thru the Telescoping link.

The metric gray knuckle uses a double socket configuration to clamp the ball on a base, link, or sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing capability.

The metric gray Tee Knuckle was designed to work with a Tee Link to create two branches from one base. These knuckles can also be used to give a full 180° range of motion if you do not need through cable routing.

This metric gray coupler connects a standard size ball to an XS series ball. This is great for mixing and matching to meet your needs.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM, IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sensopart, and Turck 30MM threaded barrel- type sensors.
Sight holes allow the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage. The metric sensor mount SLM-7 mounts to SLM-2, SLM-290, and SLM-2-2XS.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM,IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sesopart and Truck 12MM threaded barrel-type sensors.
The sensor cable can still run back through your Swivellink assembly for a clean look and protection from damage.The metric sensor mount SLM-SB-12 mounts to SLM-SBH and SLM-SBH-XS Sensor Bracket Holders.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM,IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sesopart and Truck 18MM threaded barrel-type sensors.
The sensor cable can still run back through your Swivellink assembly for a clean look and protection from damage.The metric sensor mount SLM-SB-18 mounts to SLM-SBH and SLM-SBH-XS Sensor Bracket Holders.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM,IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sesopart and Truck 30MM threaded barrel-type sensors.
The sensor cable can still run back through your Swivellink assembly for a clean look and protection from damage.The metric sensor mount SLM-SB-30 mounts to SLM-SBH and SLM-SBH-XS Sensor Bracket Holders.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM,IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sesopart and Truck 8MM threaded barrel-type sensors.
The sensor cable can still run back through your Swivellink assembly for a clean look and protection from damage.The metric sensor mount SLM-SB-8 mounts to SLM-SBH and SLM-SBH-XS Sensor Bracket Holders.

The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage.The metric sensor bracket holder mounts to SLM-SB-30, SLM-SB-18, SLM-SB-12, and SLM-SB-8 brackets.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM, IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sensopart, Sick, Tri-Tronics, and Turck 18MM threaded barrel- type sensors.
Sight holes allow you the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage.
The metric sensor mount SLM-8 mounts to SLM-2, SLM-290, and SLM-2-2XS

If your camera has a 1/4-20 tripod mount, you can simply thread on the XS series stem and mount your camera.
The imperial blue AFSB-5XS mounts to AFSB-2XS, AFSB-2XS90, and AFSB-2-2XS.

This blank plate is for end user custom mounting.

This imperial blue plate mounts to AFSB-1XS small ball base.

Fits: Keyence, Omron, Sentech. See “Brand Match” tab for model numbers that mount to this plate.

The imperial blue plate mounts to AFSB-1XS small ball base.

Fits SICK and Sensopart. See “Brand Match” tab for model numbers that mount to this plate.
The imperial blue plate mounts to AFSB-1XS.

Fits: CCS, Cognex,Keyence, Smart Vision, and SVS Vistek. See “Brand Match” tab for model numbers

This imperial blue plate mounts to AFSB-1XS small ball base.

Fits: Cognex, .. See “Brand Match” tab for model numbers.
Mounts to AFSB-2XS, AFSB-2XS90, or AFSB-2-2XS.

Fits: Banner. See “Brand Match” tab for model numbers

This imperial blue blue plates mounts to AFSB-1XS.

Fits: Allied Vision, Avalon, Banner, Basler, Cognex, Fanuc, IDS, Imaging Source, JAI, Keyence, Kowa, and Sony. See Compatible Products Table for compatible models.

This imperial blue plate mounts to AFSB-1XS small ball base.

Fits: GoPro camera.

Mounts to AFSB-2XS, AFSB-2XS90, and AFSB-2-2XS.

Fits: Allied Vision, IDS, Imaging Source, Keyence, JAI, Sentech and Smart Vision. See Compatible Products Table for compatible models.

This imperial blue plate mounts to the AFSB-1XS small ball base

Fits: Microscan. See Compatible Products Table for compatible models..

This imperial blue plate mounts to AFSB-1XS small ball base

Fits Spectrum Illumination. See Compatible Products Table for compatible models.

This imperial blue plate mounts to AFSB-1, AFSB-1-15, or AFSB-1XS ball bases.

Fits Spectrum Illumination. See Compatible Products Table for compatible models.

This imperial blue plate mounts to AFSB-1, AFSB-1-15, or AFSB-1XS ball bases.

Kit Includes:
1x AFSB-1XS SMALL BALL BASE
1x AFSB-2XS SMALL KNUCKLE
1x AFSB-7XS PROX SENSOR 12MM

Kit Includes:
1x AFSB-1XS SMALL BALL BASE
1x AFSB-2XS SMALL KNUCKLE
1x AFSB-8XS PROX SENSOR 8MM

Contains (2) AFSB-1XS bases, (2) AFSB-2XS knuckles, (1) AFSB-3-2XS link, and (1) Clamp Handle

Kit Includes:
1x AFSB-1XS SMALL BALL BASE
2x AFSB-2XS90 SMALL TEE KNUCKLE
1x AFSB-3-2XS SMALL LINK 2″
1x AFSB-5XS SMALL CAMERA STEM
1x BOX/PACKAGING/SWIVELLINK CATALOG

The AFSB-1004XS imperial blue single arm XS kit with a 4″ link is ready to mount any imperial XS series mounting plate. This kit includes: (2) AFSB-1XS small ball bases, (2) AFSB-2XS small knuckles, (1) AFSB-3-4XS small link, and (1) AFSB-Clamp Handle.

Contains (3) AFSB-1XS bases, (5) AFSB-2XS90 knuckles, (1) AFSB-3XST tee link, (2) AFSB-3-2XS link, and (2) Clamp Handles.

Kit Includes:
2x AFSB-1XS SMALL BALL BASE
5x AFSB-2XS90 SMALL TEE KNUCKLE
2x AFSB-3-2XS SMALL LINK 2″
1x AFSB-3XST SMALL TEE LINK
1x AFSB-5XS SMALL CAMERA STEM
1x BOX/PACKAGING/SWIVELLINK CATALOG

Contains (3) AFSB-1XS bases, (5) AFSB-2XS90 knuckles, (1) AFSB-3XST tee link, (2) AFSB-3-4XS link, and (2) Clamp Handles.

The Imperial blue (AFSB-1XS) ball base mounts to imperial plates with XS in the part number and to the Imperial XS knuckles (AFSB-2XS, AFSB-2XS90, and AFSB-2-2XS coupler). The XS (extra small) ball base has 2 holes for ease of mounting. The through hole can be used for routing wires, cables, or small hoses. There is an exit groove on the side of the base for cables, hose, and wires. Recommended hardware (not included) #10-24 Socket Head Cap Screws. Distance between bottom of ball base and top of ball base mounting surface is .25″

Color: Imperial blue

Small Links are used with Small Knuckles to extend reach and increase flexibility. The imperial small series links are available in 2 lengths: 2” and 4”. The second number in the name is representative of the length of each link, for example AFSB-3-2XS would be a 2” link.

Small Links are used with Small Knuckles to extend reach and increase flexibility. The imperial small series links are available in 2 lengths: 2” and 4”. The second number in the name is representative of the length of each link, for example AFSB-3-2XS would be a 2” link.

The Small Tee Link, when used with a Small Tee Knuckle gripped on the center ball, creates two separate branches. The hole in the center ball allows cable and hose routing for each branch.

The imperial blue small knuckle uses a double socket configuration to clamp to the ball on a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability.

The imperial blue Small Tee Knuckle was designed to work with a Small Tee Link to create two branches from one base. These small tee knuckles can also be used to give a full 180° range of motion if you do not need through cable routing.

This imperial blue coupler connects a standard size ball to an XS series ball. This is great for mixing and matching to meet your needs.

The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage.The imperial sensor bracket holder mounts to AFSB-SB-30, AFSB-SB-18, AFSB-SB-12, and AFSB-SB-8 brackets.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM, IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Sensopart, and Turck 12MM threaded barrel- type sensors.
Sight holes allow you the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage.
Mounts to AFSB-2XS, AFSB-2XS90, and AFSB-2-2XS.

Fits: Allen Bradley, Balluff, Banner, Baumer, Contrinex, Datalogic, Di-Soric, HTM, IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sensopart, and Turck 8MM threaded barrel- type sensors.
Sight holes allow you the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your Swivellink assembly for a clean look and protection from damage.
The imperial sensor mount AFSB-8XS mounts to AFSB-2XS, AFSB-2XS90, and AFSB-2-2XS.

If your camera has a 1/4-20 tripod mount, you can simply thread on the XS series stem and mount your camera.
The metric gray SLM-5XS mounts to the SLM-2XS, SLM-2XS90, and SLM-2-2XS.

This blank plate is for end user custom mounting.

This metric gray plate mounts to the SLM-1XS small ball base.

Fits: Keyence, Omron, Sentech. See “Brand Match” tab for model numbers that mount to this plate.

The metric gray plate mounts to SLM-1XS small ball base.

Fits SICK and Sensopart. See “Brand Match” tab for model numbers that mount to this plate.
The metric gray plate mounts to SLM-1XS.

Color: Metric Gray

Fits: CCS, Cognex,Keyence, Smart Vision, and SVS Vistek. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1XS small ball base.

Fits: Cognex. See “Brand Match” tab for model numbers
Mounts to SLM-2XS, SLM-2XS90, or SLM-2-2XS.

Color: Metric Gray

Fits: Banner. See “Brand Match” tab for model numbers

This metric gray plate mounts to SLM-1XS.

Color: Metric Gray

Fits: Allied Vision, Avalon, Banner, Basler, Cognex, Fanuc, IDS, Imaging Source, JAI, Keyence, Kowa, and Sony. See Compatible Products Table for compatible models.

This metric gray plate mounts to SLM-1XS small ball base.

Fits: GoPro camera.

Mounts to SLM-2XS, SLM-2XS90, and SLM-2-2XS.

Fits: Allied Vision, IDS, Imaging Source, Keyence, JAI, Sentech and Smart Vision. See Compatible Products Table for compatible models.

This metric gray plate mounts to the SLM-1XS small ball base.

Fits: Microscan. See Compatible Products Table for compatible models..

This metric gray plate mounts to SLM-1XS small ball base

Fits Spectrum Illumination. See Compatible Products Table for compatible models.

This metric gray plate mounts to SLM-1, SLM-1-40, or SLM-1XS ball bases.

Color: Metric Gray

Fits Spectrum Illumination. See Compatible Products Table for compatible models.

This metric gray plate mounts to SLM-1, SLM-1-40, or SLM-1XS ball bases.

Color: Metric Gray

Kit Includes:
1x SLM-1XS METRIC SMALL BALL BASE
1x SLM-2XS METRIC SMALL KNUCKLE
1x SLM-7XS METRIC PROX SENSOR 12MM

Kit Includes:
1x SLM-1XS METRIC SMALL BALL BASE
1x SLM-2XS METRIC SMALL KNUCKLE
1x SLM-8XS METRIC PROX SENSOR 8MM

This kit includes: (2) SLM-1XS metric small ball bases, (2) SLM-2XS metric small knuckles, (1) SLM-3-50XS metric small link, and (1) SLM-Clamp Handle.

Kit Includes:
1x SLM-1XS METRIC SMALL BALL BASE
2x SLM-2XS90 METRIC SMALL TEE KNUCKLE
1x SLM-3-50XS METRIC SMALL LINK 50MM
1x SLM-5XS METRIC SMALL CAMERA STEM
1x PAMPHLET
1x BOX/PACKAGING

This kit includes: (2) SLM-1XS metric small ball bases, (2) SLM-2XS metric small knuckles, (1) SLM-3-100XS metric small link, and (1) SLM-Clamp Handle.

This kit includes: (3) SLM-1XS metric small ball bases, (5) SLM-2XS90 metric small tee knuckles, (1) SLM-3XST metric small tee link, (2) SLM-3-50XS metric small link, and (2) SLM-Clamp Handles.

Kit Includes:
2x SLM-1XS METRIC SMALL BALL BASE
5x SLM-2XS90 METRIC SMALL TEE KNUCKLE
1x SLM-3XST METRIC SMALL TEE LINK
2x SLM-3-50XS METRIC SMALL LINK 50MM
1x SLM-5XS METRIC SMALL CAMERA STEM
1x PAMPHLET
1x BOX/PACKAGING

This kit includes: (3) SLM-1XS metric small ball bases, (5) SLM-2X90 metric small tee knuckles, (1) SLM-3XST metric small tee link, (2) SLM-3-100XS small links, and (2) SLM-Clamp Handles.

The metric gray (SLM-1XS) ball base mounts to Metric Mounting Plates with XS in the part number and to the Metric XS knuckles (SLM-2XS, SLM-2XS90, and SLM-2-2XS coupler). The XS (extra small) ball base has 2 holes for ease of mounting. The through hole can be used for routing wires, cables, or small hoses. There is an exit groove on the side of the base for cables, hose, and wires. Recommended hardware (not included) M5 Socket Head Cap Screws. Distance between bottom of ball base and top of ball base mounting surface is 6.35MM

Metric Small Links are used with Metric Small Knuckles to extend reach and increase flexibility. The imperial small series links are available in 2 lengths: 50mm and 100mm. The second number in the name is representative of the length of each link, for example SLM-3-50XS would be a 50mm link.

Color: Metric Gray

Metric Small Links are used with Metric Small Knuckles to extend reach and increase flexibility. The imperial small series links are available in 2 lengths: 50mm and 100mm. The second number in the name is representative of the length of each link, for example SLM-3-100XS would be a 100mm link.

Color: Metric Gray

The Metric Small Tee Link, when used with a Metric Small Tee Knuckle gripped on the center ball, creates two separate branches. The hole in the center ball allows cable and hose routing for each branch.

Color: Metric Gray

The metric gray small knuckle uses a double socket configuration to clamp to the ball on a small base, small link, or small sensor mount. The design allows for a large range of motion while maintaining the internal hose and cable routing ability.

The metric gray Small Tee Knuckle was designed to work with a Small Tee Link to create two branches from one base. These small tee knuckles can also be used to give a full 180° range of motion if you do not need through cable routing.

This metric gray coupler connects a standard size ball to an XS series ball. This is great for mixing and matching to meet your needs.

The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage.The metric sensor bracket holder mounts to SLM-SB-30, SLM-SB-18, SLM-SB-12, and SLM-SB-8 brackets.

Fits: Allen Bradley, Balluff, Banner, Baumer, Carlo Gavazzi, Contrinex, Datalogic, Di-Soric, HTM, IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Sensopart, and Turck 12MM threaded barrel- type sensors.
Sight holes allow you the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage.
Mounts to SLM-2XS, SLM-2XS90, and SLM-2-2XS.

Fits: Allen Bradley, Balluff, Banner, Baumer, Contrinex, Datalogic, Di-Soric, HTM, IFM, Keyence, Leuze, Omron, Pepperl Fuchs, Red Lion, Sensopart, and Turck 8MM threaded barrel- type sensors.
Sight holes allow you the ability to see the indicator lights even when the sensor is threaded into the mount. The sensor cable can still run back through your swivellink assembly for a clean look and protection from damage. The metric sensor mount SLM-8XS mounts to the SLM-2XS, SLM-2XS90, and SLM-2-2XS.

The heavy duty ball base has a hole pattern to fit most standard T-slot aluminum extrusions. The through hole can be used for routing wires, cables, or hoses. Recommended hardware (not included) 5/16-18 Socket Head Cap Screws. Distance between bottom of ball base and counterbore seat is .50″

The heavy duty link is used with the heavy duty knuckle to extend the reach and increase the flexibility. The heavy duty link has a knurled area around the both ball ends to increase the grip and stability of the assembled parts. The HD series links are available in two lengths: 4” and 6”. The second number in the name is representative of the length of each link, for example AFSB-3-6HD would be a 6” link.

The heavy duty link is used with the heavy duty knuckle to extend the reach and increase the flexibility. The heavy duty link has a knurled area around the both ball ends to increase the grip and stability of the assembled parts. The HD series links are available in two lengths: 4” and 6”. The second number in the name is representative of the length of each link, for example AFSB-3-6HD would be a 6” link.

The heavy duty knuckle uses a double socket configuration to clamp onto the heavy duty ball base or heavy duty link. The design allows for a large range of motion while maintaining the internal hose and cable routing capabilities. The heavy duty knuckle is shipped with (2) socket head cap screws. The clamp handle is included.